If you are a full-time cruiser (or plan to be) traveling the world and depend on sustainable energy production, then you'll find the D400 fits the bill. It's the highest quality wind generator out there featuring NO UPPER LIMIT maximum energy (over 600W seen!!), super efficiency, no/low maintenance, no noise, and no vibration. We are unique, selling the D400 as a package - only. This D400 package that we offer has all components and accessories ready to install, including a full manual on integrating the various pieces of equipment. The regulator, although not fancy, has proven time and again able to handle the variation and extreme energy output. All you need is the pole (Kato Marine is highly recommended) and wire.
We are the #1 worldwide online supplier of the D400 wind generator hands down - with actual cruising experience. We can get you the parts whenever and wherever you need them and answer any questions regarding your particular situation on your vessel. You've landed on this page because you've seen a D400 for yourself and /or you've done your research and concluded that this is the wind generator for you. Yes, it's at the top of your budget but everything about the D400 makes the stretch worth it.
If you have further questions after going through this material, feel free to email: firstname.lastname@example.org.
***Sales tax will be charged if shipped to the states of CT (6.35%) and MD (6%) after order goes through.
FAQ before purchase?
600+W maximum (truth!!)
420W @ 14 m/s (28 knots)
235W @ 11 m/s (22 knots)
Starts charging @ 5 knots
12kts, 44W = 3.7 Amps
22kts, 235W = 19.6 Amps
28kts, 420W = 35 Amps
You will need a pole with the following dimensions: 42mm ID (inner diameter), 50-70mm OD (outer diameter). The D400 base sits inside the bushing (delrin sleeve) and the bushing sits inside the pole.
See also the TECHNICAL SPECIFICATIONS tab just under the pictures for more information.
If in the US, we recommend the
Kato Pole Solution. Outside the US would be easier (much cheaper than shipping) to source a marine welder and materials locally.
If you have installed LITHIUM BATTERIES and are looking for a suitable wind generator system, we trade out the NCHC regulator/controller for a 6TB regulator/controller. The 6TB does not have the battery equalization setting, which spikes voltage to 15.9V.
Because the installation, voltage settings, applications and use of the D400 wind generator, regulator, diversion load and other associated equipment (D400) is beyond the control of seller, seller assumes no liability for any damage to the above equipment or any other equipment, premises, vessel or vehicle o which it is installed. Upon purchase, customer acknowledges and agrees that all voltage settings are the responsibility of customer and within the parameters established by the manufacturer of any battery system to which the D400 is connected. Seller makes no warranty express or implied of merchantability or fitness for a particular purpose.
Customer acknowledges receipt and acceptance of this waiver or liability and further acknowledges and agrees that any claim for damages to property or person are expressly waived. An electronic acceptance upon order shall be of the same force and effect as an original, signed copy.
Eclectic Energy D400 Install (2)