Home > LED Lighting > Steaming Lights >

Signal Mate 3NM LED Combination Masthead (Steaming) and Anchor [3NMMHANC]
Signal Mate 3NMMHANC


 
List Price: $314.00
Our Price: $295.00
Savings: $19.00

Product Code: SM016
Qty:



The following items are included with this product:

DESCRIPTION
 
This light is used as a masthead (steaming, 225 deg.) navigation light or as an anchor light. To use as an anchor light the steaming (225*) light needs to be turned on as well as the stern (135 deg.) navigation light. Turning both circuits will give you 225* + 135* = 360 deg. all round anchor navigation light. This light should be mounted atop the mast without obstructions in 360 degrees around the light. Bracket and switch are included.
This navigation light is not used as a stern light.

The combination masthead with anchor is a 3 wire installation and uses 2 printed circuit boards (2 separate circuits). One for masthead and the second for the anchor light, both must be turned on for the anchor light.

  • Black wire is battery negative (minus) common to both red and white wires.
  • Red wire is battery positive (plus) & is switched on or off for the masthead (225deg, steaming) light.
  • White wire is battery positive (plus) & is switched on or off for the stern (135deg) light and is used only when used as an anchor light.
Visibility: 3nm
Voltage Range: 9-30VDC
Current Draw: 0.160 amps at 12VDC
Construction: Hard anodized aluminum, Poly Carbonate lens.
Wiring: 2 1/2 feet UV outdoor 20 AWG wire.
Weight: 8 oz
Height: 3.75 inches
Diameter: 1.5inches
Mounting: 1/4- 20 female threads at bottom of light for mounting.
Durability: Waterproof, submersible
Warranty: 3 years
Certifications: USCG 3NM, ABYC-A16, COLREGS '72

Accessories
Signal Mate 360 Degree Navigation Light Bracket [BRKT360] Signal Mate Pole Mount Adapters
Our Price: $22.50
MISEA Signal Mate 360 Degree Navigation Light Bracket [BRKT360] Signal Mate Pole Mount Adapters

Share your knowledge of this product. Be the first to write a review »